This season has been all about options for moving the streamer. Our focus has been on the animations available to attract and then sell the trout on the streamer presentation. In this season finale, we talk about river scenarios and share some tips and strategies that help tie all of the previous episodes together.We discuss the following:How different fly designs suggest fishing them different waysShould all streamers have flash?How to adapt to big riversDiscipline in approach and following throughAre trout attracted by randomness in the presentation or turned off by it?How to adapt when we know big trout are in the areaDoes matching the baitfish type matter?Blending presentation stylesHow to convert trout that won't commitMy friend, Austin Dando, joins me for a great discussion.Thanks to everyone out there who supports the Troutbitten Project. Your enthusiasm for this endeavor and your kindness are always appreciated.ResourcesREAD: Troutbitten | Category | StreamersREAD: Troutbitten | Streamer Presentations -- The Cross Current StripREAD: Troutbitten | Streamer Presentations - Quick of SmoothREAD: Troutbitten | Cover Water, Catch Trout  VisitTroutbitten WebsiteTroutbitten InstagramTroutbitten YouTubeTroutbitten Facebook Thank You to Pre-Roll Ad Sponsors:SkwalaandOrvis

The tight line dance is another collection of movements to the streamer loosely grouped together into a system or framework for covering many water types and gaining reactions from the trout. It's all about taking the advantages of a tight line, Mono Rig system to the streamer game and using contact to control every aspect of the streamer's course through the river.We use a visible streamer for the tight line dance. We watch the streamer dip and swoon around rocks, tree parts and the river bank. Wherever there's good structure, that's the next target. The concept of the tight line dance allows us to hold the streamer around structure for longer, animating the streamer in every way imaginable to convince the trout.My friend, Austin Dando, joins me for a great discussion.ResourcesREAD: Troutbitten | Category | StreamersREAD: Troutbitten | Streamer Presentations -- The Tight Line DanceREAD: Troutbitten | Streamer Presentations - The Super Pause VisitTroutbitten WebsiteTroutbitten InstagramTroutbitten YouTubeTroutbitten Facebook Thank You to Pre-Roll Ad Sponsors:SkwalaandOrvis

With episode seven of this Troutbitten Skills Series, we’ve finally come to the point where we’ve covered all the different ways to move a streamer and give it some animation. Now it’s time to put all of that together.This whole series has been about what motions might sell the presentation. Because how we move the streamer fools the next trout. And there’s such a wealth of options that it can be very helpful to break things down into individual parts.So we talked about jerk strips, glides, slides, speed leads, lane changes, jigs and head flips. We’ve talked a lot about the position or orientation of the fly in the water. Is it drifting with the current, crossing currents or swinging against them? Is the streamer near the surface or is it deep? And within all these animations, are we moving the fly quick or smooth, and are the motions long or short?Now, for the last three episodes of this streamer presentations skills series, we’re ready to talk about putting a group of these animations into a system, a mindset, or a framework for fishing your streamer.In this episode, we introduce the concept of the Crossover Technique, which is all about getting the streamer low in the strike zone and then animating it within a narrow range, being careful not to move the fly out of the strike zone or move it too far. It’s a really fun presentation style, if you can get your brain around the small, often minor animations necessary. The Crossover is also extremely effective, and it results in a much lower refusal percentage than most streamer tactics.So, we can go out and choose only to swing flies or to strip them cross current — or to slow slide, jerk strip or jig. The point is, each of the presentations we talked about in the previous episodes stands alone as a great way to show the streamer to a trout.But we also like to spend time combining these presentations — because it’s fun. Because fishing streamers like this is a creative, fluid process of working with what the river gives you and adapting to new situations, moment after moment.So the real trick with something like the Crossover is to be disciplined enough to stay within your framework while also using your creativity.My friend, Austin Dando, joins me for a great discussion.ResourcesREAD: Troutbitten | Category | StreamersREAD: Troutbitten | Streamer Presentations -- The Crossover TechniqueVIDEO: Troutbitten | Fish and Film -- Crossover ShiftsREAD: Troutbitten | How Big of an Ask?VisitTroutbitten WebsiteTroutbitten InstagramTroutbitten YouTubeTroutbitten Facebook Thank You to Pre-Roll Ad Sponsors:SkwalaandOrvis

Speed leads happen mostly in one lane, and they go faster than their parent current. Lane changes are exactly what they sound like — the fly is traveling in one lane, and then we deliberately bring the fly over to a nearby lane and travel down that one.The speed lead is a term coined by our friend, Josh Stewart. Way back in 2017, I published a few articles about low-riding streamer presentations, with streamers tied on lead ball jigs. I’d gotten the idea from Rich Strolis, and it was a bit of an underground thing at the time. I remember that Stewey got in touch after reading my article, and we started sharing ideas and presentation styles with some of these flies. When I described leading low but faster than the current, Josh said he called it a speed lead, and it was one of his best tactics for stirring up big trout.The Speed Lead is a big part of what we do with streamers. It's another animation to mix in while reading and working the water, searching for the best way to present the streamer. Lane changes are the perfect compliment for a speed lead. My friend, Austin Dando, joins me for a great discussion.ResourcesREAD: Troutbitten | Category | StreamersREAD: Troutbitten | Streamer Presentations -- The Speed LeadREAD: Troutbitten | Streamer Presentations -- The Endless RetrieveREAD: Troutbitten | Troutbitten Fly Box -- The Jig StreamersVisitTroutbitten WebsiteTroutbitten InstagramTroutbitten YouTubeTroutbitten Facebook Thank You to Pre-Roll Ad Sponsors:SkwalaandOrvis

We've covered many animations in these series. We’ve talked about the streamer head position and its direction, about cross current movement vs holding one lane. We've covered jerk strips, glides, slides, fast, slow, quick or smooth, we talked about drop rates and a lot more.And now, we're here to talk about one of the most basic movements performed on any fly, lure or bait — jigging.Moving the fly up and then letting it drop — it’s such a simple motion that it might seem silly to spend much time on the topic. But like so many other good things in fishing, jigging is a world of its own. And there are, in fact, a multitude of variables to consider and to play with.In this episode, we talk about angle, depth and speed of the jig, cross current or one current jigs, free falls or pendulum drops, and more.My friend, Austin Dando, joins me for a great discussion.ResourcesREAD: Troutbitten | Category | StreamersREAD: Troutbitten | Streamer Presentations -- Jigging the StreamerREAD: Troutbitten | Troutbitten Fly Box -- The Jig StreamersVisitTroutbitten WebsiteTroutbitten InstagramTroutbitten YouTubeTroutbitten Facebook Thank You to Pre-Roll Ad Sponsors:SkwalaandOrvis

This steamer presentation is what streamer anglers probably do most — swinging the flies. From what I see on the water, what I read in articles and watch in videos, I think it’s fair to say, swinging is a pretty popular look.But it’s also fair to say that swinging is what we do the least. I think part of that is regional.Swinging streamers is a good tactic. It’s not our preferred method, but that might not matter to you and to the trout in your waters. That’s kind of the point to this whole Streamer Presentations series — I think it’s best to be armed with a wide range of tactics — or presentations. Try them all, and then let the fish decide.I mix in swings every day that I fish streamers. I give swings a chance. Sometimes a swing suits the moment better than anything else. And sometimes I let a slow slide or cross current strips finish out below me, allowing tension to change the head angle, and I finish by letting the fly swing out.Swinging is arguably the easiest presentation on a streamer. That also might make it the most relaxing. It’s a great way to cover a lot of water, and it’s an easy way to stay in rhythm.We get more refusals with a swing than with most other tactics. We also average smaller trout to the net. That might have a lot to do with a swinging presentation being more attractive than natural. And when we do get a solid take on a swing, clean hooks sets can be challenging and we’re in a bad place to start fighting a good fish.My friend, Austin Dando, and I cover all of that and more in this episode.ResourcesREAD: Troutbitten | Category | StreamersREAD: Troutbitten | Natural vs Attractive PresentationsPODCAST: Troutbitten | Night Fishing for Trout - Swinging and DriftingVisitTroutbitten WebsiteTroutbitten InstagramTroutbitten YouTubeTroutbitten Facebook Thank You to Pre-Roll Ad Sponsors:SkwalaandOrvis

For us, streamer fishing is best when we actively and intentionally move the fly. But with glides and slides, our animations are often subtle, because sometimes these are the most natural or convincing looks.Rolling the bottom, gliding mid-current along a knee-deep riffle or slow-sliding off the bank — all of these maneuvers are just as enticing, and they catch just as many trout as flashy retrieves (sometimes). But we tend to forget them. Or rather, we might not have the discipline to stay with an understated look for very long, because the modest stuff isn’t as exciting — maybe it’s not as much fun either. Gliding the fly is drifting it downstream in one current. Sliding the fly starts with a glide and then brings it across currents. My friend, Austin Dando, and I dig into all the possibilities. ResourcesREAD: Troutbitten | Category | StreamersREAD: Troutbitten | Streamer Presentations -- The Deadly Slow SlidePODCAST: Troutbitten | Night Fishing for Trout - Swinging and DriftingVisitTroutbitten WebsiteTroutbitten InstagramTroutbitten YouTubeTroutbitten Facebook Thank You to Pre-Roll Ad Sponsors:SkwalaandOrvis

The Head Flip is a pivot. It’s a simple change of the streamer's head angle, from down and across to up and across, or from upstream to downstream. This pivot doesn’t necessarily move the fly out of its area, but the motion might seem pretty dramatic to a trout. The Head Flip shows trout an opportunity for an easy meal, and it might signal a moment of vulnerability. It's one of our favorites animations to a streamer.We Cover the FollowingWhat it is and why it worksBest water typesAngles to changeBest lines and leadersBest fliesDepthSpeedCombining the Head Flip with other animationsAnd much more . . .ResourcesREAD: Troutbitten | Category | StreamersREAD: Troutbitten | Streamer Presentations -- The Head FlipVIDEO: Troutbitten | The Head FlipVisitTroutbitten WebsiteTroutbitten InstagramTroutbitten YouTubeTroutbitten Facebook Thank You to Pre-Roll Ad Sponsors:SkwalaandOrvisThank You to Pre-Roll Ad Sponsors:SkwalaandOrvis

The ability to move the fly with the rod tip and not just the line hand is a fundamental skill that opens creative options for the streamer angler.Almost two decades ago, Kelly Galloup’s first streamer book changed the way anglers thought about moving a streamer. All these years later, the jerk strip isn’t just one way to move the streamer. It’s a technique for using both hands, in concert, synchronized, for presentations that are impossible to achieve any other way.Move the fly with the rod tip and then recover with the line hand. In this way, the Jerk Strip sets the table for everything else to follow in this Troutbitten Skills Series on Streamer Presentations.We Cover the FollowingAngles, speeds, cadenceDepth and distanceFast vs smoothFlies and fly rodsTroubleshooting the mechanicsJig Strip, Glide Strip, Twitch StripGood slack and bad slackStrip sets and hook setsAnd much more . . .ResourcesREAD: Troutbitten | Category | StreamersREAD: Troutbitten | Streamer Presentations -- Jigs, Jerks and StripsVIDEO: Troutbitten | The Jerk Strip -- Streamer PresentationsVisitTroutbitten WebsiteTroutbitten InstagramTroutbitten YouTubeTroutbitten Facebook Thank You to Pre-Roll Ad Sponsors:SkwalaandOrvisThank You to Pre-Roll Ad Sponsors:SkwalaandOrvis

This season is a ten-part Troutbitten Skill Series, all about Streamer Presentations. We've been looking forward to this one for a long time.We spend a lot of our time dead drifting dry flies and nymphs. But with streamers, we’re trying to make them look alive. Instead of no motion, we move the fly. And this is exactly why we love to fish streamers. Because we get tired of dead drifting. And we love to think about everything  we can do with a streamer to make a trout eat the fly.A lot of angler say that streamer fishing is salesmanship. That's a great description of the process, because we need to convince the fish that what we’re offering is worth the effort.But how do we sell it? What are the animations? What are the things we can do with a long fly, to make it look like a baitfish, like a crayfish, a sculpin, maybe a small trout or a fall fish?This Skills Series will highlight a number of these ways to move the fly. We’ll talk about the Jerk Strip, the Head Flip, Jigging, Speed Leads, Lane Changes, the Crossover Technique, Swinging, Drifting, Gliding, Sliding and more, with dedicated episodes for each.But, what can we control? Within all of those different presentations, what are the elements that make up a Head Flip, for example? How deep is a streamer during a slow slide? How fast is it going during a Speed Lead? While swinging or drifting, what elements can we adjust and which ones are actually out of our control.Covering those elements is our goal with this first episode on Streamer Presentations. We’re here to put some details around the things we can control on a streamer.Head Position (the direction of the fly)DepthSpeedAnd whether we’re holding one seam or crossing seamsNotably, we won’t talk much in this series about flies or even lines and leaders. Because the point is, you can get these motions, these presentations on a wide variety of lines — sinking line, floating line or a Mono Rig. You can use short leaders, long leaders, poly leaders or standard. You can fish it all. But the real question with streamers . . . is how do you want the fly to move?The joy of streamer fishing is that everything works sometimes. Trout respond to many kinds of presentations out there, and trying to dial that in is a fun way to spend your day.ResourcesREAD: Troutbitten | Category | StreamersREAD: Troutbitten | Streamer Presentations -- Jigs, Jerks and StripsPODCAST: Troutbitten | Streamer Presentations -- All About the Head of the FlyVisitTroutbitten WebsiteTroutbitten InstagramTroutbitten YouTubeTroutbitten Facebook Thank You to Pre-Roll Ad Sponsors:SkwalaandOrvisThank You to Pre-Roll Ad Sponsors:SkwalaandOrvis